Trailed reverse plow with seven plowshares PERESVET PPO-5/7-35
The housing capture width is stepwise variable – 30/35/40 cm. The plow capture width is 2.1/2.45/2.8 m, respectively. The adjustments allow one to set the plow accurately: taking into account the power of the tractor, type of soil, weather conditions.
Its productivity per hour is up to 1.89/2.2/2.52 hectares per hour, depending on the working width. The plow is aggregated with tractors of 250-300 hp power
The additional housing can be disconnected, and plow can be used as the one with six plowshares – PPO-5/6-35.
The plow is intended for smooth plowing, with a turnover of a soil layer, all types of soils, except stony soils, to a depth of 30 cm.
A tractor equipped with a revolving plow reaches the edge of the plot, makes a plow revolution, and passes the plot with the second set of working bodies. This saves fuel – a tractor does not need to do idle runs.
An ordinary plow leaves ridges and dead furrows behind, while a reversible plow leaves a level surface. Smooth plowing increases productivity and facilitates work later when harvesters and mowers go across the field.
As usual, a reversible plow cuts, loosens, crumbles, and wraps a layer of soil, tills weeds. Dump soil treatment improves the penetration of air, water, and nutrients to the roots of plants.
It can be equipped with feather dumps
Produced by AMA, Italy. It is recommended for sticky and heavy soils. Compared to conventional ones, feather dumps have less soil adhesion and higher crumbling
Productivity in 1 hour of the main time, ha/h
Working speed, km/h
Up to 9
Tillage depth, cm
Up to 30
Working width m
Overall dimensions (in working position), mm
The distance from the supporting plane of the left- and right-turning housings to the lower plane of the frame, mm
Number of working bodies, pcs.
Service life, years
Soil Quality Indicators
Ridgeness of the soil surface, not more than, cm
Quality of the soil layer crumbling (fractions up to 5 cm), %
Covering plant and crop residues, %
Without stones, flagstone and other obstacles, with specific resistance up to 0.09 MPa (0.9 kg/cm2), hardness up to 3 MPa (30 kg/cm2) and humidity up to 22%
Agregated with a tractor power