PERESVET PON-4+1
Mounted reverse plow with five plowshares PERESVET PON-4+1
The housing capture width is stepwise variable – 30/35/40 cm. The plow capture width is 1.5/1.75/2 m, respectively. The adjustments allow you to set the plow accurately: taking into account the power of the tractor, type of soil, weather conditions.
Its productivity per hour is up to 1.35/1.58/1.8 hectares per hour, depending on the working width. The plow is aggregated with tractors of 155-200 hp power
The additional housing can be disconnected, and plow can be used as the one with four plowshares – PON-4.
The plow is intended for smooth plowing, with a turnover of a soil layer, all types of soils, except stony soils, to a depth of 30 cm.
A tractor equipped with a revolving plow reaches the edge of the plot, makes a plow revolution, and passes the plot with the second set of working bodies. This saves fuel – a tractor does not need to do idle runs.
An ordinary plow leaves ridges and dead furrows behind, while a reversible plow leaves a level surface. Smooth plowing increases productivity and facilitates work later when harvesters and mowers go across the field.
Aggregating method
Mounted
Productivity in 1 hour of the main time, ha/h
1,35; 1,58; 1,8
Working speed, km/h
Up to 9
Working width m
1,5; 1,75; 2
Tillage depth, cm
Up to 30
Weight, kg
1485
Overall dimensions (in working position), mm
Length
4350
Width
2450
Height
1650
The distance from the supporting plane of the left- and right-turning housings to the lower plane of the frame, mm
750±10
Number of working bodies, pcs.
10
Service life, years
8
Soil Quality Indicators
Ridgeness of the soil surface, not more than, cm
3…5
Quality of the soil layer crumbling (fractions up to 5 cm),%
71…75
Covering plant and crop residues, %
90
Soil requirements
Without stones, flagstone and other obstacles, with specific resistance up to 0.09 MPa (0.9 kg/cm2), hardness up to 3 MPa (30 kg/cm2) and humidity up to 22%
Agregated with a tractor power
155-180 hp
